GS Hobby Feed

GSHobby_logo

This is just a partial list of the latest products offered by the GS Hobby feed. When you’re looking for a reliable place, with great prices, to order RC Parts be sure to check out GSHobby.com.

Schelle Racing SCH1500 1/10 & 1/8 Car Carrier Bag

Sep 20 2017
$64.60
$64.60
$64.60

Custom designed to hold and protect your most valuable piece of R/C gear, Schelle has taken the car bag to a whole new level with their sleek design and unparalleled functionality.  The bag is stocked with premium padding, handles, zipper pulls and accessories.   It comes with internal storage compartments for lexan wings, tires, protectors and more.  It can even accommodate a car stand and pit board when housing a 1:10 car.

MAP: 
0.00

read more

Schelle Racing SCH1263 B6 Front Tower and Wing Mount, Flat

Sep 20 2017
$21.60
$21.60
$21.60

Schelle has done it again with the new B6 Front Tower and Wing Mount, Flat.   The front tower design mates with a 3-d printed upper wing mount (mount and hardware included) so that racers can screw-on their front wing without removing the shock standoffs.   The screw on front wing design eliminates the common wing failure of cracking at the mount tabs against the front tower.  Now racers can quickly remove the mount without removing the shock standoff screws, as well as remove the wing off the car (for travel or cleaning) while keeping the mount in place.

MAP: 
0.00

read more

Schelle Racing SCH1362 Carbon Fiber B64 Antenna Less Floating Servo Brace

Sep 20 2017
$9.50
$9.50
$9.50

With most racers opting for internal antenna-less recievers, Schelle have a B64 and B64D antenna-less servo plate ready to clean up the look on your buggy.   In addition to removing the antenna and shaving some weight, the outer servo mount position slot is removed.   In our testing, the kit design with a slotted screw hole was more prone to loosen up from the vibrations and loads in off-road racing.

 

Features:

MAP: 
0.00

read more

Schelle Racing SCH1369 B64 Aluminum Steering Rack (Black)

Sep 20 2017
$13.30
$13.30
$13.30

The B64 and B64D kits come with a plastic steering rack that has tons of flex and can break the first hard hit you take at the races.    The new Schelle design reduces flex in the steering system, increases durability, and will translate to a more positive feeling in the corners.

 

Features:

MAP: 
0.00

read more

Schelle Racing SCH1357 Aluminum B64/B64D Rear Hub Set (Blue)

Sep 20 2017
$45.00
$45.00
$45.00

Schelle broke new ground with the 1/10th  2-piece hub concept on the B5 series.  Now, the best hubs on the market are available for the B64 and B64D.  The 2-piece design with replaceable caps increases adjustment and durability.  The Schelle B64 hubs fit the kit axle height inserts for 0, +1, +2, and +3 adjustability.  The standard location "inside, +1mm shim" matched the kit standard upper row middle "B" hole.  The upper cap design can space away from the main hub with ballstud shims, allowing racers fine “in-between” adjustment

MAP: 
0.00

read more

Schelle Racing SCH1356 Aluminum B64/B64D Rear Hub Set (Black)

Sep 20 2017
$45.00
$45.00
$45.00

Schelle broke new ground with the 1/10th  2-piece hub concept on the B5 series.  Now, the best hubs on the market are available for the B64 and B64D.  The 2-piece design with replaceable caps increases adjustment and durability.  The Schelle B64 hubs fit the kit axle height inserts for 0, +1, +2, and +3 adjustability.  The standard location "inside, +1mm shim" matched the kit standard upper row middle "B" hole.  The upper cap design can space away from the main hub with ballstud shims, allowing racers fine “in-between” adjustment

MAP: 
0.00

read more

Exotek Racing EXO1759 B6/B6D Aluminum Upper Steering Brace (Blue)

Sep 20 2017
$16.45
$16.45
$16.45

Alloy upper steering brace plate and steering crank crush sleeve set. Strengthens the steering assembly from bending at the mounting screws as well as provides support to keep the steering crank bearings from binding and breaking.

The brace is shaped to fit into the pocketed area of the upper plate and keeps the steering from bending or flexing at the bearing screws.

Only 1.2gr for all 3 parts.

 

Compatible with:

Team Associated RC10 B6

MAP: 
0.00

read more

Exotek Racing EXO1765 22-4 2.0 Aluminum Front Pivot Block (Black)

Sep 20 2017
$31.41
$31.41
$31.41

New extra heavy duty machined 7075 alloy front pivot mount for the 22-4 2.0.

Must have upgrade to avoid those costly and time consuming DNF's from failures of the stock plastic pivot mount.

Machined out for lightness (weighs just 17.6gr) and a perfect fit onto the front gearbox.

Includes (2) m3 set screws to lock down the hinge pins.

 

Compatible with:

TLR 22-4 2.0

 

 

 

MAP: 
0.00

read more

Exotek Racing EXO1758 22 4.0 Titanium Flite Front Axles (2)

Sep 20 2017
$20.36
$20.36
$20.36

Precision machined premium titanium 12mm front hex axle set for the TLR22 4.0.

At only 3.5 grams per pair, these axles reduces the rotational mass as well as unsprung weight over the stock axles.

Almost as strong as steel but nearly half the weight and not easily bent as the aluminum axles.

Rounded and angled hex profile makes wheel installation extra quick and easy.

 

Compatible with:

TLR 22 4.0

MAP: 
0.00

read more

Exotek Racing EXO1764 Aluminum 22 4.0/3.0 Front Camber Block w/Roll Bar Mount (Black)

Sep 20 2017
$16.96
$16.96
$16.96

For the 22 4.0, 22 3.0 series of buggies and trucks.

Heavy duty alloy front camber block for use with TLR sway bars. Machined down to 7 grams to minimize weight but made with 7075 alloy to increase the strength over the stock piece.

Designed with set screw holes to remove excess play from the sway bars (do not over tighten included set screws- sway bars must be free).

 

Compatible with:

TLR 22

MAP: 
0.00

read more

Exotek Racing EXO1742 Aluminum B64 Wing Mount (Blue)

Sep 20 2017
$27.99
$27.99
$27.99

By popular demand we bring you heavy duty 7075 alloy wing mounts for the B64. Sturdy design keeps your wing angle true for correct aero, lap after lap.

Polished, laser etched and anodized in factory blue and works with the stock wing spacer and hardware.

 

Compatible with:

Team Associated RC10 B64

Team Associated RC10 B64D

MAP: 
0.00

XRay 322110 Composite Suspension Arm Front Lower - Graphite

Sep 20 2017
$11.25
$11.25
$11.25
More Info...

XRay  Composite Suspension Arm Front Lower - Graphite

MAP: 
0.00

read more

XRay 362400 Anti-Roll Bar 1.0mm Set

Sep 20 2017
$14.25
$14.25
$14.25
More Info...

XRay 362400 Anti-Roll Bar 1.0mm Set

MAP: 
0.00

read more

XRay 365875 Composite 3-Pad Slipper Clutch Spur Gear 75T / 48

Sep 20 2017
$7.50
$7.50
$7.50
More Info...

XRay 365875 Composite 3-Pad Slipper Clutch Spur Gear 75T / 48

Optional spur gear for 3-Pad Slipper Clutch. Precision-molded slipper clutch spur gear 75T 48P is made from XRAY's exclusive secret blend of composite material, allowing the gear to be robust enough to handle high-performance brushless motors. The spur gear is designed to have the lowest possible weight while staying strong and light. Each gear has a stamped tooth number for easy identification.

MAP: 
0.00

XRay 322312 Brass Front Lower Arm Mount 26° Kick-Up

Sep 20 2017
$40.00
$40.00
$40.00
More Info...

XRay 322312 Brass Front Lower Arm Mount 26° Kick-Up

Optional brass lower arm mount has an integrated 26° kick-up angle. The brass arm mount adds more weight in front which results in less weight transfer and increased on-power steering.

MAP: 
0.00

XRay 302665 Composite Ball Joint 4.9mm - Closed with Hole (4)

Sep 20 2017
$7.50
$7.50
$7.50
More Info...

XRay 302665 Composite Ball Joint 4.9mm - Closed with Hole (4)

MAP: 
0.00

read more

XRay 323351 Alu Rear Upright - 7075 T6

Sep 20 2017
$30.00
$30.00
$30.00
More Info...

XRay 323351 Alu Rear Upright - 7075 T6

Super-compact rear upright CNC-machined from high-grade Swiss 7075 T6 aluminum features 9 different upper roll center positions. The rear uprights feature 0° toe to ensure stability and to prevent suspension geometry changes in hard crashes. 

Recommended for high-traction conditions. Increases rear stability.

MAP: 
0.00

XRay 325000 Ball Adjustable Differential - Set - HUDY Spring Steel

Sep 20 2017
$70.00
$70.00
$70.00
More Info...

XRay 325000 Ball Adjustable Differential - Set - HUDY Spring Steel

MAP: 
0.00

read more

XRay 321103 XB2D'17 Alu Chassis - Swiss 7075 T6 (2mm)

Sep 20 2017
$90.00
$90.00
$90.00
More Info...

XRay 321103 XB2D'17 Alu Chassis - Swiss 7075 T6 (2mm)

MAP: 
0.00

read more

XRay 321263 Graphite Chassis Side Guard Brace - Set

Sep 20 2017
$19.99
$19.99
$19.99
More Info...

XRay 321263 Graphite Chassis Side Guard Brace - Set

Graphite brace installed in front part of side guards makes the front chassis flex stiffer. Using this option part the car is easier to drive and cornering speed is increased. The brace also makes landing after jumps more forgiving. This brace is used by the entire XRAY Racing Team on the XT2 to make it super easy to drive, especially with spec tires that generally make the cars more aggressive. Suitable for XB2C, XB2D, and XT2.

MAP: 
0.00

Leave a comment

Add your comment below, or trackback from your own site. You can also subscribe to these comments via RSS.

Your email is never shared. Required fields are marked *